|
|
| Air compressor HAC600 / HAC800 |
 |
 |
 |
 |
 |
=Introduction of HAC600/800=
HAC600/800 air compressor is adopting horizontal layout.
This type specially aims to its efficiency and low vibration by having additional valves.
In addition,it has a lot of advantages,such as reducing the lubricating oil consumption,
long term usage of each part by introducing the aluminum cylinders and the latest piston rings.
Especially,this type fully works in the case under the high rate of operation using in a long-term,
and continuous operation. |
=Dimensional drawing= |
 |
=HAC600 HAC800-air compressor standard specification=
| Standard |
The standard is based on JIS B 8342,which is the small reciprocating air compressor. |
| Compressopn method |
Reciprocating formula |
| Handling gas |
air |
| Cooling system |
air-cooling |
| Lubrication system |
Splash |
| Drive system |
Belt |
| Compression stage |
2 |
| Condition around |
Temperature：0ﾟC-40ﾟC
Humidity：0%-80%
Token amount：Less then 1000ｍ *1
Set-up place：indoors
Atmospherics：There are not a particle,corrode-ability gas,explosive gas |
| Electric |
3Phase AC200/200/220V-50/60/60Hz
AC380/400/415/400/440V-50/50/50/60/60Hz |
| Start |
Direct |
| Motors |
5.5kW,7.5kW together type "T.E.F.C *2 |
| Lubricating oil |
ISO VG46,68,100reciprocating compressor oil *3 |
| Oil capacity |
8L |
=HAC600 HAC800-type air compressor rating specifications=
| Model |
HAC600 |
HAC800 |
| Required out put(kW) |
5.5 |
7.5 |
| Revolutin(r/min) |
600 |
800 |
Net displacement(m3/h) |
24 |
32 |
| Delivery pressure |
3.0MPa |
| Out line weight(kg) |
300 |
310 |
| Operation noise(db-A) *4 |
Less then 80 |
| Air exit *5 |
φ12weld sleeve or the φ15weld sleeve |
| Coated color(Munsell) *6 |
7.5BG6/1.5(gray)or 2.5G7/2(light green) |
| Accessories |
Anchor bolt,Nut,Operation scorecard,Operation manual |
*1:When installing in the height position.net displacement decreases.
*2:The moter manufacture,the format can be chosen,For details,pleese ask us.
*3:Forannual operation,use the 68 article or its similarities.
The 46 is for in cold place and the 100 is for in a tropical place use.
*4:It values at 1 meter of the main unit front,(not pulley-side)the 1 meter height.
*5:It is possible to change the bite type tube fitting,Flange and so on.(Cost option)
*6:It is possible coated color to be changed,to separate a color from belt cover.(Cost option)
* The product may change its outward appearance and the specification without previous announcements.
|
=Equipment=
|
|
|
